Hardware Installation Manual
3.2.1.4.3 WAN SFP LED
The WAN SFP LED indicates the status of the optical fiber WAN link, as described in the
table below.
LED Color
LED State
Green
On
Flashing
-
Off
3.2.1.4.4 WAN DSL LED
The WAN DSL LED indicates the status of the DSL WAN link, as described in the table
below.
LED Color
LED State
Green
On
Fast
Flashing
Slow
Flashing
Two Fast
Flashes +
Idle
Sequences
-
Off
Mediant i-Series
Table 3-8: WAN SFP LED Description
WAN fiber link established.
Data is being received or transmitted.
No WAN fiber link or power not received by the device.
Table 3-9: WAN DSL LED Description
DSL link connected (trained) successfully with peer ("showtime").
Training up (connection in progress) and negotiating with peer.
DSL port is administratively up, but idle (not connected and no peer
detected).
DSL port is initializing itself after being enabled or upon mode change.
DSL port is administratively shutdown or not configured.
15
3. Physical Description
Description
Description
Mediant 500Li