Configuring Sntp - Hirschmann RS20 User Manual

Synchronizing the system time in the

8.2.3 Configuring SNTP

Select the Time:SNTP dialog.
Configuration SNTP Client and Server
In this frame you switch the SNTP function on/off.
When it is switched off, the SNTP server does not send any
SNTP packets or respond to any SNTP requests.
The SNTP client does not send any SNTP requests or evaluate
any SNTP broadcast/Multicast packets.
SNTP Status
The "Status message" displays conditions such as "Server can-
not be reached".
Configuration SNTP Server
In "Anycast destination address" you enter the IP address to
which the SNTP server on the device sends the SNTP packets.
IP destination Send SNTP packets
address periodically to
0.0.0.0 Nobody
Unicast Unicast
224.0.1.1 Multicast
255.255.255.255 Broadcast
Table 8: Periodic sending of SNTP packets
144
8.2 SNTP
Basic Configuration L2P
Release 4.2 07/08