Hirschmann RS20 User Manual page 119

Network load control
Assigning the traffic class to a DSCP
enable
configure
classofservice ip-dscp-map-
ping cs1 1
show classofservice ip-dscp-mapping
IP DSCP
-------------
0(be/cs0)
1
.
.
8(cs1)
.
Always assign the DSCP priority to received IP data pack-
ets for each interface (Power MICE and MACH 4000)
enable
configure
interface 6/1
classofservice trust ip-
dscp
exit
exit
show classofservice trust
6/1
Class of Service Trust Mode: IP DSCP
Non-IP Traffic Class: 2
Always assign the DSCP priority to received IP data pack-
ets globally
enable
configure
classofservice trust ip-
dscp
exit
exit
show classofservice trust
Basic Configuration L2P
Release 4.2 07/08
Switch to the Priviledged EXEC mode.
Switch to the Configuration mode.
Assign traffic class 1 to DSCP CS1.
Traffic Class
-------------
2
2
1
Switch to the Priviledged EXEC mode.
Switch to the Configuration mode.
Switch to the interface configuration mode of inter-
face 6/1. Assign the "trust ip-dscp" mode to the in-
terface.
Switch to the Configuration mode.
Switch to the Priviledged EXEC mode.
Display the trust mode on interface 6/1.
Switch to the Priviledged EXEC mode.
Switch to the Configuration mode.
Assign the "trust ip-dscp" mode globally.
Switch to the Configuration mode.
Switch to the Priviledged EXEC mode.
Display the trust mode.
7.4 QoS/Priority
119