Reports - Hirschmann RS20 User Manual

Operation diagnosis

9.10Reports

The following reports are available for the diagnostics:
Log file
The log file is an HTML file in which the device writes all the important
device-internal events
System information.
The system information is an HTML file containing all system-relevant
data.
System information.
The security data sheet IAONA is a data sheet in the XML format that has
been standardized by IAONA (Industrial Automation Open Networking
Alliance). Among other data, it contains security-related information on
the accessible ports and the associated protocols.
Diagnostic table
The diagnostic table lists the alarms (traps) that were generated.
In service situations, these reports provide the technician with the necessary
information.
Select the Diagnostics:Report dialog.
Click "Log File" to open the HTML file in a new browser window.
Click "System Information" to open the HTML file in a new browser
window.
Syslog
The device enables you to send messages about important device-inter-
nal events to up to 4 Syslog servers.
enable
configure
logging host 10.0.1.159 514 3 Select the recipient of the log messages and its
logging syslog
exit
show logging hosts
184
Switch to the Priviledged EXEC mode.
Switch to the Configuration mode.
port 514. The "3" indicates the importance of the
message sent by the device. "3" means "error".
Enable the Syslog function.
Switch to the Priviledged EXEC mode.
Display the Syslog host settings.
9.10 Reports
Basic Configuration L2P
Release 4.2 07/08