Hirschmann RS20 User Manual page 34

Entering the IP Parameters
Save the configuration entered using
copy system:running-config nvram:startup-config
and press the Enter key.
Confirm that you want to save it by pressing y.
NOTE: Enter '?' for Command Help. Command help displays all options
that are valid for the 'normal' and 'no' command forms.
syntax of a particular command form, please consult the
tation.
(Hirschmann PowerMICE) >en
(Hirschmann PowerMICE) #network protocol none
(Hirschmann PowerMICE) #network parms 149.218.112.105 255.255.255.0
(Hirschmann PowerMICE) #copy system:running-config nvram:startup-con-
fig
Are you sure you want to save? (y/n) y
Copy OK: 15811 bytes copied
Configuration Saved!
(Hirschmann PowerMICE) #
After entering the IP parameters, you can easily configure the device via the
Web-based interface (see the "Web-based Interface" reference manual).
34
2.2 Entering IP parameters via CLI
Basic Configuration L2P
For the
documen-
Release 4.2 07/08