Hirschmann RS20 User Manual page 37

Entering the IP Parameters 2.3 Entering the IP Parameters via HiDiscovery
53
Figure 11: HiDiscovery - assigning IP parameters
Note: When the IP address is entered, the device copies the local configura-
tion settings (see on page 53 „Loading/saving settings").
Note: For security reasons, switch off the HiDiscovery function for the device
in the Web-based interface, after you have assigned the IP parameters to the
device (see page 49 „Web-based IP configuration").
Note: Save the settings so that you will still have the entries after a restart
(see on page 53 „Loading/saving settings").
Basic Configuration L2P
37
Release 4.2 07/08