Hirschmann RS20 User Manual page 121

Network load control
Configuring Layer 3 management priority
Select the QoS/Priority:Global dialog.
In the line IP-DSCP value for management packets you enter
the IP-DSCP value with which the device sends management pack-
ets.
enable
network priority ip-dscp
cs7
exit
show network
System IP Address.............................. 10.0.1.116Subnet
Mask.................................... 255.255.255.0Default
Gateway................................ 10.0.1.200Burned In MAC
Address.......................... 00:80:63:51:7A:80Network Config-
uration Protocol (BootP/DHCP).... NoneDHCP Client ID (same as SNMP
System Name)...... "PowerMICE-518280"Network Configuration Proto-
col HiDiscovery..... Read-WriteManagement VLAN
ID............................. 1Management VLAN Priori-
ty....................... 7Management IP-DSCP Val-
ue....................... 56(cs7)Web
Mode....................................... EnableJavaScript
Mode................................ Enable
Basic Configuration L2P
Release 4.2 07/08
Switch to the Priviledged EXEC mode.
Assign the value cs7 to the management priority so
that management packets with the highest priority
are handled.
Switch to the Priviledged EXEC mode.
Displays the management VLAN priority.
7.4 QoS/Priority
121