Setting Up Dhcp/Bootp Server - Hirschmann RS20 User Manual

Setting up configuration environment
A.1 Setting up DHCP/BOOTP
server
On the CD-ROM supplied with the device you will find the software for a
DHCP server from the software development company IT-Consulting
Dr. Herbert Hanewinkel. You can test the software for 30 calendar days
from the date of the first installation, and then decide whether you want to
purchase a license.
To install the DHCP servers on your PC,
put the CD-ROM in the CD drive of your PC and
under Additional Software select "haneWIN DHCP-Server".
To carry out the installation, follow the installation assistant.
Start the DHCP Server program.
Figure 62: Start window of the DHCP server
Note: The installation procedure includes a service that is automatically
started in the basic configuration when Windows is activated. This service is
also active if the program itself has not been started. When started, the ser-
vice responds to DHCP queries.
Open the window for the program settings in the menu bar: Op-
tions:Preferences and select the DHCP tab page.
Enter the settings shown in the illustration and click OK.
190
A.1 Setting up DHCP/BOOTP server
Basic Configuration L2P
Release 4.2 07/08