Setting Up The Tftp Process - Hirschmann RS20 User Manual

Setting up configuration environment
A.3.1 Setting up the tftp process
General prerequisites:
The local IP address of the device and the IP address of the tftp server or
the gateway are known to the device.
The TCP/IP stack with tftp is installed on tftp server.
The following sections contain information on setting up the tftp process,
arranged according to operating system and application.
SunOS and HP
First check whether the tftp daemon (background process) is running,
i.e. whether the file /etc/inetd.conf contains the following line
fig. 78) and whether the status of this process is "IW":
SunOS
tftp dgram udp wait root /usr/etc/in.tftpd in.tftpd -
s /tftpboot
HP
tftp dgram udp wait root /usr/etc/in.tftpd tftpd
If the process is not in the file, or if the related line is commented out (#),
modify /etc/inetd.conf accordingly and then re-initialize the INET daemon.
This is performed with the command "kill -1 PID", where PID is the pro-
cess number of inetd. This re-initialization can be executed automatically
by entering the following UNIX commands:
SunOS
ps -ax | grep inetd | head -1 | awk -e {print $1} |
kill -1
HP
/etc/inetd -c
You can obtain additional information about the tftpd daemon tftpd with
the UNIX command "man tftpd".
Basic Configuration L2P
Release 4.2 07/08
A.3 tftp server for software updates
(see
201