Access Via Ssh - Hirschmann RS20 User Manual

Setting up configuration environment
copy tftp://10.0.10.1/
device/rsa1.key
nvram:sshkey-rsa1
ip ssh
A.4.3 Access via SSH
The program PuTTY enables you to access your device via SSH. This
program is located on the product CD.
Start the program by double-clicking on it.
Enter the IP address of your device.
Select "SSH".
Click "Open" to set up the connection to your device. Depending on the
device and the time at which SSH was configured, it can take up to a
minute to set up the connection.
Shortly before the connection is set up, PuTTY displays a security alert mes-
sage and gives you the option of checking the fingerprint of the key.
Figure 80: Security alert prompt for the fingerprint
Basic Configuration L2P
Release 4.2 07/08
A.4 Preparing access via SSH
The device loads the key file to its non-volatile
memory.
10.0.10.1 represents the IP address of the
tftp server.
device represents the directory on the
tftp server.
rsa1.key represents the file name of the key.
Reactivate the SSH function after transfering the
key to the device.
207