Hirschmann RS20 User Manual page 22

Access to the user interfaces
Start your Web browser.
Make sure that you have activated JavaScript and Java in the security
settings of your browser.
Establish the connection by entering the IP address of the device
which you want to administer via the Web-based management in the
address field of the Web browser. Enter the address in the following
form:
http://xxx.xxx.xxx.xxx
The login window appears on the screen.
Figure 6: Login window
Select the desired language.
In the drop-down menu, you select
– user, to have read access, or
– admin, to have read and write access
to the device.
The password "public", with which you have read access, appears in
the password field. If you wish to have write access to the device, then
highlight the contents of the password field and overwrite it with the
password "private" (default setting).
Click on OK.
The website of the device appears on the screen.
22
1.3 Web-based Interface
Basic Configuration L2P
Release 4.2 07/08