Starting The Software; Performing A Cold Start - Hirschmann RS20 User Manual

Loading software updates
Test stored images in USB memory
Select 4 to check whether the images of the software stored in the
ACA 21-USB contain valid codes.
Apply and store selection
Select 5 to confirm the software selection and to save it.
Cancel selection
Select 6 to leave this dialog without making any changes.

4.1.2 Starting the software

This menu item (Start Selected Operating System) of the system monitor al-
lows you to start the software selected.

4.1.3 Performing a cold start

This menu item (End (reset and reboot)) of the system monitor allows you to
reset the hardware of the device and perform a restart.
Basic Configuration L2P
Release 4.2 07/08
4.1 Loading the software from the ACA
67