Resetting The Configuration To The State On Delivery - Hirschmann RS20 User Manual

Loading/saving settings
3.1.4 Resetting the configuration to the state on
delivery
The device enables you to
reset the current configuration to the state on delivery. The locally saved
configuration is kept.
reset the device to the state on delivery. After the next restart, the IP
address is also in the state on delivery.
Select the
Basics: Load/Save dialog.
Make your selection in the "Delete" frame.
Click "Delete configuration".
Setting in the system monitor:
Select 5 "Erase main configuration file"
This menu item allows you to reset the device to its state on delivery. The
device saves configurations that differ from the state on delivery in the
switch.cfg file in the flash memory.
Press the Enter key to delete the switch.cfg file.
58
3.1 Loading settings
Basic Configuration L2P
Release 4.2 07/08