Hirschmann RS20 User Manual page 180

Operation diagnosis
If several devices are connected to one port, for example via a hub, the
table will contain one line for each connected device.
If
devices with active topology discovery function and
devices without active topology discovery function
are connected to a port, the topology table hides the devices without
active topology discovery.
If
only devices without active topology discovery are connected to a
port, the table will contain one line for this port to represent all devic-
es. This line contains the number of connected devices.
MAC addresses of devices that the topology table hides for the sake
of clarity, are located in the address table (FDB) .
tering static address
180
entries").
9.8 Topology discovery
(see page 94 „En-
Basic Configuration L2P
Release 4.2 07/08