Hirschmann RS20 User Manual page 19

Access to the user interfaces
Copyright (c) 2004-2005 Hirschmann Automation and Control GmbH
User:
Figure 3: Logging in to the Command Line Interface program
Enter a user name. The default setting for the user name is admin.
Press the Enter key.
Enter the password. The default setting for the password is private.
Press the Enter key.
You can change the user name and the password later in the Com-
mand Line Interface.
Please note that these entries are case-sensitive.
The start screen appears.
Basic Configuration L2P
Release 4.2 07/08
All rights reserved
PowerMICE Release L3P-01.0.00-K16
(Build date 2005-10-31 19:32)
System Name: PowerMICE
Mgmt-IP : 149.218.112.105
1.Router-IP: 0.0.0.0
Base-MAC : 00:80:63:51:74:00
System Time: 2005-11-01 16:00:59
1.2 Command Line Interface
19