Protection from unauthorized access
6.2 Telnet/Web/SSH access
6.2 Telnet/Web/SSH access
6.2.1 Description of Telnet access
The Telnet server of the device allows you to configure the device by using
the Command Line Interface (in-band). You can deactivate the Telnet server
to prevent Telnet access to the device.
On delivery, the server is activated.
After the Telnet server has been deactivated, you will no longer be able to
access the device via a new Telnet connection. If a Telnet connection already
exists, it is kept.
Note: The Command Line Interface (out-of-band) and the Security:Tel-
net/Web access dialog in the Web-based interface allow you to reactivate
the Telnet server.
6.2.2 Description of Web access
The Web server of the device allows you to configure the device by using the
Web-based interface. You can deactivate the Web server to prevent Web
access to the device.
On delivery, the server is activated.
Basic Configuration L2P
81
Release 4.2 07/08