Configuring the ports
In the "Port on" column, you can enable/disable PoE at this port.
The "Status" column indicates the PoE status of the port.
In the "Priority" column (MACH 4000), set the PoE priority of the port
to "low", "high" or "critical".
The "Class" column shows the class of the connected device:
Class
0
1
2
3
4
The "Name" column indicates the name of the port, see
Basic settings:Port configuration.
Figure 20: Power over Ethernet dialog
74
Maximum power delivered
15.4 W = state on delivery
4.0 W
7.0 W
15.4 W
Reserved, treat as class 0
Basic Configuration L2P
Release 4.2 07/08