Hirschmann RS20 User Manual page 50

Entering the IP Parameters
You enter the name applicable to the DHCP protocol in the "Name" line in
the system dialog of the Web-based interface.
The "VLAN ID" frame enables you to assign a VLAN to the agent. If you
enter the illegal VLAN ID "0" here, the agent can be accessed by all
VLANs.
The HiDiscovery protocol allows you to assign an IP address to the device
on the basis of its MAC address. Activate the HiDiscovery protocol if you
want to assign an IP address to the device from your PC with the enclosed
HiDiscovery software (setting on delivery: active).
Note: Save the settings so that you will still have the entries after a restart
(see page 53 „Loading/saving
50
2.8 Web-based IP configuration
settings").
Basic Configuration L2P
Release 4.2 07/08