Hirschmann RS20 User Manual page 129

Network load control
Note: Save the VLAN configuration to non-volatile memory
fig. 39).
Note: The 255 available VLANs (Power MICE, MACH 4000: 256) can
use any VLAN ID between 1 and 4042 (MACH 4000: 3966).
Note: In a HIPER-Ring with VLANs, you should only operate devices
with the software that supports this function:
RS2 xx/xx (from vers. 7.00),
RS2-16M,
RS 20, RS 30, RS 40 (L2E, L2P)
MICE (from rel. 3.0) or
Power MICE
MS 20, MS 30
RSR20, RSR30
MACH 1000
MACH 4000
MACH 3000 (from rel. 3.3)
OCTOPUS
Note: In the HIPER-Ring configuration, select for the ring ports
VLAN ID 1 and "Ingress Filtering" in the port table and
VLAN membership U in the static VLAN table.
Basic Configuration L2P
Release 4.2 07/08
7.6 VLANs
(see
129