Undo - Rodgers PR-300S Owner's Manual

Undo
Sometimes, after listening to the results of a
Quantize operation, or after erasing the wrong
measures of a song or pasting scratchpad information
into the wrong measures of a song, you'll wish you
could reverse what you've just done.
The PR-300S's Undo feature lets you do just that.
The Undo function reverses the last Cut, Erase, Paste
Quantize or Transpose operation you performed.
Please note: You can only Undo the last function
performed, and, you can't Undo an operation once
you've entered the Record mode.
Also, sometimes, when you are performing a Cut,
Erase, Paste or Transpose function, the PR-300S will
display "Memory Low, Continue Without Undo".
What this means is that the operation you are
performing takes up so much memory that the PR-
300S will not be able to "Undo" afterwards. If you
press [ENTER] at this point, you will be unable to
perform an "Undo" operation to reverse the procedure.
To Undo the last Cut, Erase, Paste, Quantize or
Paste operation:
(1)
Hold [SHIFT] and press [UNDO].
(2) Press [ENTER].
The last Cut, Erase, Paste, Quantize or Paste
operation is reversed and you will return to the Play
Screen.
87
TRANSPOSE