Rodgers PR-300S Owner's Manual page 46

~
L...-! -'
Press [TEMPO) t o l
move" !:>" prompt to this location
c
{
r
4
• •
r
•
,
• •
• •
• •
•
C
• •
• •
• •
• •
(
(
C.
L
(
•
(
L
(
.,
.1. ••••.
'j
.:.
Rotate the alpha-dial to select
"Trumpet" for Part 1.
I
to.!
to.
:i .
i:..,"
TEMPO
J= -
TRANSPOSE
•
METRONOME
-
o
0 0 0 0
-~---
WRITE
-
TUNE
•
III
38
Sounds appearing in the display can be played by
pressing notes on the Great. This is a good way to
sample the many different sounds of the PR-300S.
Pressing [TEMPO) and [BEAT) move the cursor
through the different fields of the display.
You can adjust the volume of the Metronome by
rotating the METRONOME VOLUME knob on the
back of the PR-300S.
The PR-300S will ask you to confirm that you want
the Trumpet voice assigned to MIDI channel I by
asking "Write Sure?".
The Metronome will be heard and the light above
the METRONOME button will turn red.
The light above the Track 1 button will turn red and
the light above the PLAY button will flash green.
This assigns the Trumpet voice of the PR-300S to
MIDI channel I.
The PR-300S will return to the Play Screen.
The light above the REC button will turn red and
all of the Track button lights will flash red.
This button is located underneath the top panel.
(6) Press [TEMPO] to move the""-" prompt to the
beginning of the second line, as shown at right.
(7) Rotate the alpha-dial until "Trumpet" is
selected.
(9) Press [ENTER] to confirm the voice selection.
(8) Press [WRITE] to enter the voice selection for
MIDI channell.
(10) Press [METRONOME] on the PR-300S.
(12) Press [TRACK 1] to select the first track.
(11) Press REC to enter record mode.