Pause Marks; Setting A Pause Mark; Deleting A Pause Mark - Rodgers PR-300S Owner's Manual

Pause Marks
Sometimes, it is desirable to have the PR-300S
stop automatically within a song, when you want to
playa solo break or cadenza, or have your choir
continue on unaccompanied. This can be done by
setting a Pause Mark.
When the PR-300S encounters a Pause Mark, it
will stop automatically, When you want it to
continue, all you need to do is press the Play button or
press the pedal connected to the "Start/Stop" jack.
You can set up to five different Pause Marks in
each song. Pause Marks have no effect when you are
Recording or are in Repeat Play or Chain Play.
Setting a Pause Mark
(1)
Move to where you want the Pause Mark to be
placed.
You can either press [STOP] during playback or
use the [BWD] and [FWD] buttons to move to the
appropriate point.
(2) Hold [SHIFT] and press [PAUSE MARK].
The PR-300S will ask if you are sure you want to
set a Pause Mark. If you don't want to set a Pause
Mark, press [STOP].
Jumping to a Pause Mark
While holding down the [STOP] button, press
[BWD] to move to the previous Pause Mark or
press [FWD] to move to the next Pause Mark.
CHAIN PLAY
--
c?T
PAUS(SRO
(3) Press [ENTER] to set the Pause Mark.
The PR-300S will stop when it gets to the Pause
Mark you just set.
Deleting a Pause Mark
(1)
Jump to the Pause Mark you want to delete.
(2) While holding down [SHIFT], press the [PAUSE
MARK] button.
The PR-300S will ask if you are sure you want to
delete a Pause Mark. If you don't want to delete the
Pause Mark, press [STOP].
(3) Press [ENTER] to delete the Pause Mark.
CHAIN PLAY
--
c?T
PAUS(SRO
TRANSPOSE
TRANSPOSE
69