Rodgers PR-300S Owner's Manual page 51

To prepare the organ and PR-300S to record the
organ part:
(1)
Enable the Great and Pedal MIDI Master
Channels using the procedure outlined in the
Owner's Manual for your organ.
Divided expression organs Single expression organs
This is found under the "MIDI Master Channels"
section of the organ's Owner's Manual.
Rodgers organs: Make sure you re-enable
transmission of information on the Great and
Pedal Master Channels.
If the MIDI Master Channels are not re-enabled,
the organ part will not be recorded. If you are
using a single-expression organ, make sure to
reenable the Swell Master channel also.
Turn on Great Master
Channel
Turn on Pedal Master
Channel
Turn on Great Master
Channel
Turn on Pedal Master
Channel
Turn on Swell Master
Channel
(2) Press [MIDI] on the PR·300S.
This button is located under the top cover. The
screen at right will appear in the display.
MIDI
-
DISK
:Offl () i...!
"1:..
•
I
l' : ' l I
!::::
I
~i;'
c:: 1:::)::::.
~<
------------
(3) Rotate the alpha-dial until "Clock Out: Off"
appears in the display.
This is the field where the master clock is disabled
or enabled.
(4)
Press [TEMPO] to move the""" prompt to the
end of the second line.
TEMPO
J=
-
II"Jff
1
(5) Rotate the alpha-dial to select "Clock Out:
On".
This enables the PR-300S's master clock.
•
1
l' : ' l I l : ::: I
__ C_:
: _l.
,_::::_c_:.!_<_(_)_i ... _ r!_: .. _ _
li' · _C_:ii_·"i---,
(6) Press [ENTER] to confirm change.
TRANSPOSE
After the MIDI Master Channels and PR-300S
master clock have been enabled, you can sequence the
organ part on an empty track by following the steps
outlined in "Sequencing the First Part" (you may need
to use the Merge function again to create a blank
track). You can use all manuals and pedal for the
43