Rodgers PR-300S Owner's Manual page 49

For this reason, the PR-300S is equipped with a
Merge function. Merge allows you to combine the
information of two different tracks onto a single track.
By using the Merge function, a free track for the flute
descant can be created without losing any of the
previously recorded information.
The PR-300S's Merge function takes any and all
information on a track and adds it to information on
another track. The information merged onto one track
can be separate channels (i.e., different instruments)
or it can be the same MIDI channel.
The Merge function uses the CUT and PASTE
buttons located underneath the top cover.
For this example, Track 4 will be merged with
Track 3 so that the flute descant can be recorded.
To merge Track 4 onto Track 3:
(1) Press [CUT].
Track 1
Part 1
Channel 1
Trumpet
Track 2
Part 2
Channel 2
French Horn
After Merging Tracks
3& 4 ...
Track 3
Part 3
Channel 3
Clarinet
Part 4
Channel 4
Cello
Track 4
This hutton is located underneath the top cover.
The screen at right will appear in the PR-300S's
display.
CUT
-
Q UANTIZE
(2) Press TRACK 4.
This specifies the Track to he cut.
(3) Press [ENTER] to cut Track 4.
This removes all MIDI information from Track 4.
(4) Press [PASTE].
This tells the PR-300S what to do with the
information removed from Track 4.
There are two different Paste options; "MER"
(Merge) and "INS" (Insert). If "MER" doesn't
appear at the heginning of the second line in the
display, press [BEAT] to move the"
ii""
prompt to
the heginning of the second line (if necessary) and
rotate the alpha-dial to select "MER".
o
0 0 0 0
-_
...
_~
TRANSPOSE
PASTE
-
ERASE
Make sure this field is set to "MER"
(Merge), NOT "INS" (Insert).
41