Table of Contents
Advertisement
Changing the Reverb of a Part
(6) Press the [>] button two times and the cursor
will move to the "Rev:" setting. Rotate the
alpha dial to change the amount of reverb for
the selected part. The range is from "0" (no
reverb) to "127" (full reverb).
"Reverb" (reverberation) is an electronically
produced echo effect that can be added to the sound
that is played. There are eight types of Reverb
available on the PR-300S, and one can be selected
for use with all Parts, See "Selecting Reverb and
Chorus Type" for more information,
Changing the Chorus of a Part
(7)
Press the [>] button to move the cursor to the
"Cho:" setting. Rotating the alpha-dial will
change the amount of Chorus that will be added
to the selected Part. The range is from "0" (no
chorus) to "127" (full chorus).
"Chorus" makes certain instruments sound
"thicker" or "fatter". There are eight types of
Chorus available on the PR-300S, and one can be
selected for use with all Parts. See "Selecting
Reverb and Chorus Type" for more information.
Changing the Expression Setting of a Part
(8)
Press the [>] button twice to move the cursor to
the "Exp:" setting. Rotating the alpha-dial will
change the expression setting for the selected
Part. The range is from "0" (lowest) to "127"
(highest).
The Expression Setting works with the Volume
Setting to determine the volume of a parl.
Expression pedals used with Rodgers organs and
keyboards normally send Volume information
(described above). You can use the Expression
setting to change the overall level of a parl. When
this is done, the volume changes received from the
organ will operate normally, and the Expression
setting will determine the range of volume change
which occurs.
In this way, Volume can be used for crescendos
and decrescendos and Expression can be used to set
the relationship of each part to other parts played.
52
-
~
-
~
-
~
(
'-
(
C
(
C
C
c
r
c
(
r
• •
• •
•
(
l.
(
• •
• •
• •
• •
•
{
L
4
(
(
(
(
Hide quick links:
Advertisement
Table of Contents
