Rodgers PR-300S Owner's Manual page 45

You can save the sequence at any time during the
recording process. To save a sequence, follow the
instructions in the section, "Saving a Sequence to
Disk".
Now it's time to begin recording the sequence:
(1)
On the Rodgers organ, turn on the MIDI ON
GREAT* coupler.
*This coupler is labeled MIDI GREAT A on larger
Rodgers organs.
Make sure no other stops or couplers are selected
on your Rodgers organ.
(2) Verify that the MIDI ON GREAT coupler is set
to send on MIDI channell.
This is the default channel for the MIDI ON
GREAT coupler, although the coupler can be set to
send on any of the 16 MIDI channels. If the MIDI
coupler isn't sending on channel I, refer "Channel
Reassignment" in your organ's Owner's Manual.
(3) On the PR-300S, press [SOUND].
This button is located underneath the top cover.
(4) Check to make sure the" _." prompt is located
to the left of "Part" in the display, as shown at
right.
If the"
ii'"
is not located here, press [BEAT]
repeatedly until proper display appears and
"~.,,
is
located to the left of "Part".
MIDI
ON
GREAT
SOUND
-
E FFECTS
BEAT
«
!
-
.....
1···..
I
Press [BEAT] repeatedly (if necessary) to
make this screen appear in the display and
to move the
"~-"
prompt to this location
(5) Rotate the alpha-dial to select "Part 1", if
necessary.
Part I receives on MIDI channel I, Part 2 receives
on MIDI channel 2, Part :I receives on MIDI
channel 3, etc.
37
Rotate the alpha-dial (if necessary)
to select Part 1.