Volume (Control Change 7) 98 Midi Implementation - Rodgers PR-300S Owner's Manual

PR-300S Digital Sequencer and Sound Module MIDI Implementation Version 1.13 Jan.
I,
1993
1. Received Data
.Channel Voice Messages
.Note off
Status Second Third
8nH kkH vvH
9nH kkH OOH
n:::MIDI channel number
kk:::Note number
vv:::Velocity
:OH - FH (ch. I - ch. 16)
:OOH - 7FH (0 - 127)
:OOH - 7FH (0 - 127)
• •
.Control change
*Ignored all control change messages other tnan channel mode messages when "Rx.Control change = OFF".
*The values set by Control change messages won't reset by receiving new Program change numbers.
*Ignored when "Rx.Bank Select == OFF".
"Rx.Bank Select" is set to OFF by "Tum General MIDI System On", and set to ON by "GS RESET". (Power on default value is "ON".)
*The LSB 7-bits are ignored (always regarded as IIH==OOH) in the PR-300S.
*"Bank Select" is suspended until "Program Change" is received.
To select a Tone of another bank, you have to send Bank select (mm, II) before sending Program change.
*The "Variation number" of GS Form at is define as the decimal expression of the MSB value (Control change number OOH) of the Bank Select.
116
*Ignored when "Rx.Note message = OFF".
*In the drum part, ignored when "Rx.Note on = OFF" is set for each instrument.
J
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
t
(
L
(
•
~
L
~
Default value = 00 OOH (bank I)
:OH - FH (ch.1 - ch.16)
:OOH,OOH - 7FH, 7FH (bank 1 - bank 16384)
:OH - PH (ch. 1 - ch. 16)
:OOH - 7FH (0 - 127)
:OOH - 7FH (0 - 127)
:OH - PH (ch. 1 - ch. 16)
;OOH - 7PH (0 - 127)
:OOH - 7FH (0 - 127)
n=MIDI channel number
mm. II=Bank number
n=MIDI channel number
kk=Note number
vv=Velocity
n:::MIDI channel number
kk:::Note number
vv=Velocity
OBank Select
Status Second Third
BnH OOH mmH
SnH 20H IIH
*Ignored when "Rx.Polyphonic key pressure = OFF".
*Effect to the parameter set on "PAf controller function",
The default setting has no effect.
.Polyphonic key pressure
Status Second Third
AnH kkH vvH
.Note on
Status Second Third
9nH kkH vvH
*In the drum part, recognized when "Rx.Note off=ON" is set for each instrument.
*Velocity is ignored.