Using A Pedal To Start And Stop The Pr-300S - Rodgers PR-300S Owner's Manual

Using a Pedal to Start and Stop the PR-300S
•
III
- - - EXT CONTROL - - -
START/ PUNCH
00'0'
55
To start the PR-300S recording, you must
first press [REC] and select a track.
(1) Connect the DP-2 (or compatible) pedal
to the jack labeled "START/STOP" on
the back of the PR-300S.
(2) Press the pedal and release to begin
playback (or record).
(3) Press the pedal and release to stop
playback or record.
To start or stop the PR-300S using a DP-2 pedal:
Normally, you'll use the Play and Stop buttons to
start and stop playback and recording of the PR-300S.
It is possible, however, to use a pedal to start and stop
the PR-300S, allowing you control from a remote
location.
In order to make use of this feature, you need to
have a DP-2 or compatible pedal (sold separately).