Table of Contents
Advertisement
Cause: You can't Save,
Delete or Copy this song
because it has been
made Read Only by MS-
DOS.
What to do: Press [STOP].
Cause: The
S1andam
MIDI
File Format 1 da1a that
you are trying to play is
too large to
fit
in memory.
What to do: Press (STOP).
Cause: You are trying to
load a
new
song
(or Copy
a song from disk) without
having saved the results
of a previous Record or
Edit for the song currently
in
memory.
This
message asks
it
you're
sure you want to erase
the song currently in
memory.
What to do; If you want to
save the current song (or
changes to the current
song), press {STOP] and
perform a
save
operation.
Otherwise, press (ENTER]
and the
current
song will
be erased.
®~O~:~i f::~,~
J
CUT/ERASE/COPYI
PASTEITRANS./QUANT.
I
i~l~~::O;~:~:/::!~_i'~~
- - - - J
CUTIERASE/COPYI
PASTEITRANS.lQUANT.
I
" . i : : . ~ . - . ' . ~
• . ........
- . ~ _ . :
• .
; - : . ~ · : :
• .
:i
o ; ~ . - . : : , . ' . , " . : . ~ . ~ ; . , '
' . ' ; .' . i'"
U :1.
1.
!.d(·l t.;::::
If, however, you see the
screen to the left, your edit
operation
exceeded
available memory and
failed. Press [STOP), and
then reload the song
version you just saved. In
this case, you will have to
either make the song you
are editing smaller or
reduce the range over
which you are editing and
try the operation again.
Cause: The PR-300S's
memory is already full, so
the
edit
cannot
be
performed.
What to do: Press [STOP).
Either make the song you
are editing smaller, or
reduce the range over
which you are editing and
try the operation again.
Cause:
SOUND and
EFFECTS settings cannot
be saved because the
PR-300S's memory is
already full.
What to do: Press [STOP).
Make the song smaller.
&' ; ' ' '
i'1,~n'Y""3
I
CUT
Continue?
CUTIERASE/COPY
I
PASTEITRANS.lQUANT.
Cause:
The
PR-300S's
internat memory is full,
and anything recorded
after this point is lost.
(The memory capacity of
the PR-300S is around
21,000 notes).
What to do: Press [STOP).
Cause: There may not be
enough memory left to
perform
the
editing
operation.
What to do: First, as a
precaution, press [STOP]
and save the song to disk.
Then repeated the edit
operation and if you get
this message again, press
[ENTER).
If you are
returned to the Play
Screen, the edit was
successful (although
you
win be unable to Undo the
operation).
I
Batter"',;
I
Chec.k
Cause: The battery which
maintains the contents of
memory while the power
is
off
needs to
be
replaced.
What
to
do:
To avoid
memory loss, take your
PR-300S to an authorized
service center to have the
battery replaced.
Cause: The Checksum in a
System Exclusive mes-
sage
was
incorrect,
possibly due to a trans-
mission error.
What to do: Press [STOP]
and start recording over
(or start recording again
from that point).
If
this
message appears reg-
ularly, contact your local
Rodgers dealer for more
information.
111
Hide quick links:
Advertisement
Table of Contents
