Song Delete - Rodgers PR-300S Owner's Manual

L
~
~
~
~
~
C
C
c
•
(
(
(
•
(
(
•
r
• •
• •
• •
(
~
•
• •
• •
• •
• •
C
C.
(
~
•
ENTER
[)e;,:l:.. "
Disk
I
_Is;;:'
.
~
------------
92
The PR-300S will tell you that it is "Copying", or
writing the song information from the Source Disk
onto the Destination Disk.
(5) Press [ENTER].
The PR-300S will ask you if you're sure you want
to select the selected song. To cancel the delete
procedure, press [STOP).
(6) Press [ENTER] to delete the song.
The Play Screen will return.
If it cannot copy all of the song information at
once, it will ask you to insert the Source Disk
again. If this happens, repeat steps 4 and 5 as many
times as necessary until the Copy procedure is
finished and the Play Screen returns.
(4) Rotate the alpha-dial to select the song you want
to delete.
(3) Rotate the alpha-dial to select "Song Delete",
then press [ENTER).
If a disk is already in the disk drive, the PR-300S
will skip this step.
If the disk in the disk drive is not the disk you want
to copy, eject the disk, press [STOP) and start this
procedure again.
(2) Hold [SHIFT) and press [DISK].
(5) After a short time, the PR-300S ask you to
"Insert Destination Disk". Eject the disk
currently in the disk drive and insert the disk
you want the songs copied to (the destination
disk).
(1)
Make sure the Write Protect tab is set to
"Write" on the disk containing the song to be
deleted. Insert the disk into the PR-300S's disk
drive.
(4) The PR-300S will ask you to insert the Source
Disk (if you haven't already done so). Insert the
disk you want to copy into the disk drive.
This procedure removes a single song from a disk.
Be careful, though, because once a song has been
deleted, there is no way to recover it!
To delete a song from a disk:
Song Delete