Changing The Metronome Resolution And Tone - Rodgers PR-300S Owner's Manual

Changing the Metronome Resolution and Tone
:. :0.
:
:0.
..
..
0::
°:°
·i:
Field for selecting tone
Available resolutions:
TRANSPOSE
METRO BEAT
-
E XPRESSION
-
65
*If you change these settings anytime after you've
pressed the [REe] button to start a recording, the
changes will be recorded along with other material.
A
"*"
mark next to a note indicates the resolution
was set at the time the song was recorded.
For example, if the resolution is set to quarter notes
in a 4/4 time signature, you'll hear 4 beats in each
bar. If it is set to eighth notes, 8 beats will be heard
in each bar.
The Play Screen will return.
(1) Press [METRO BEAT].
(2) Rotate the alpha-dial to change the note at the
cursor's position in the screen (this note
indicates the Metronome's resolution).
(3) Move the cursor over to the Tone setting with
the [>] button. A choice of TONE 1 (a
combination bell and click sound) or TONE 2
(an electronic sound), can be selected with the
alpha-dial.
(4) Press [ENTER] to confirm the changes made.
You can change the resolution and tone of the
Metronome built into the PR-300S. There are six
different resolutions and two different tones to choose
from.
To change the Metronome's resolution and/or tone: