Table of Contents
Advertisement
To perform Punch In/Out record with the
[REC] button or DP-2 Pedal:
(1)
Go to a place in the music prior to the desired
Punch In point using the [nWD] and [FWD]
buttons.
(2) Press [REC].
BWD
FWD
11::II1:1I
•
Ifill
3
] (
4
]
(3) Select the track you want to record
00.
(4) Press [PLAY].
You'll hear the
previously
recorded infonnation and
the red light above the [REC] button will blink.
You can play along with the previously recorded
information, however, nothing you play will be
recorded at this point.
(
o
R
•
PLAY
o
0
TRACK
o
o
(5) When you arrive at the point where you want to
begin recording, press the [REC] button or the
DP-2 Pedal.
The red light above the [REC] button will light and
the information you play will replace what was
previously on the selected track.
(6) When you want to stop recording new
information
(and
recording
over
old
information), press the [PLAY] button or DP-2
pedal again.
The previously recorded information
will
begin to
play back again.
(7) Press [STOP].
•
Ifill
•
PLAY
The Punch In/Out techniques described above are
quite useful when you want to re-record a small
portion of a PR-300S track.
When you are finished, be sure to disable Punch
In/Out with the following procedure:
(1)
Hold [SHIFTI and press (PUNCH IN/OUT].
(2) Rotate the alpha-dial to select "Ofr'.
(3) Press [ENTER] to the Play Screen.
73
TEMPO REC
--
I
F'i...ij···jC:!..·j I !...!.....
()!...!.T'
I ~
T,RAENNSTPEORSE
j1;'
C)
f' F'
.
L -
Hide quick links:
Advertisement
Table of Contents
