Rodgers PR-300S Owner's Manual page 55

TRANSPOSE
Rotate alpha-dial to select Part 2.
Make sure this field is set to "MER"
(Merge), NOT "INS" (Insert).
Press [TEMPO] to move the
" i:""
prompt to this location.
Select desired
Instrument for Part 2
using Sound Function
TEMPO
J= -
~
The information previously recorded on MIDI
channel I will be shifted to MIDI channel 2 and
placed on Track 2.
47
In step I, you selected the sound for Part I. Now
that the recording you made has been shifted to
MIDI channel 2, you need to select the appropriate
sound for Part 2.
Any of the 16 MIDI channels can be selected in
this step.
This specifies that the information to be pasted to
Track 2 will be shifted to MIDI channel 2. Any
information which was cut in steps 3-5 above will
be shifted to MIDI channel 2.
If you are pasting information to a track which
already has information stored on it, make sure
"MER" (Merge) is selected as the paste mode. If
"INS" (Insert) is selected, the new information
pasted to the track will displace the information
previously stored on the track.
This is where the information to be pasted can be
shifted to another MIDI channel.
(8) Press [TEMPO] to move the " .. " prompt over
to the "Part" field in the display (as shown at
right).
(9) Rotate the alpha-dial to select "2".
(10) Press [ENTER].
(11) Use the Sound Function to select the desired
sound for Part 2.
Go through this procedure each time you want to add
additional parts to a PR-300S sequence. Each time a part is
added, make sure the information is pasted to a different part
number in steps 8 and 9.