Rodgers PR-300S Owner's Manual page 47

(13) Rotate the alpha-dial to select a different tempo,
if desired.
If the"
ii""
prompt isn't located next to the tempo
indication in the display, press [TEMPO] before
rotating alpha-dial.
(14) Press [PLAY]. After two count-in measures,
play the music shown at right on the Great
manual of the Rodgers organ.
Count-in measures are listed with a minus sign "-"
preceding the number ("-2, -I "). Regular measures
have no minus sign. Nothing can be recorded in
the count-in measures.
•
Press [PLAY] and play music above
after two countdown measures.
t
The music you play will use the Trumpet voice of
the PR-300S. Any movements of the expression
pedal will cause the Trumpet to change volume.
The expression changes will be recorded and
cannot be changed without re-recording the entire
part.
There is a way to select an alternate volume for a
part; see "Changing the Expression Setting of a
Part" for more information.
(15) Press [STOP] when you are finished recording
the first part.
If you make a mistake, press [RESET] to return the
PR-300S to measure I and record the part again
using steps II through 14.
"-2" or "-1
II
in the display
denotes a countdown measure.
A number without a minus sign
denotes a regular measure.
(l6)Press [RESET] to return the PR-300S to
measure 1.
You can also use the BWD key to return to
measure I.
(17) Press [PLAY] to listen to the part you just
recorded.
Congratulations! You have just recorded the first
track of a Multi-Track Sequence!
39
RESET
11:II