Rodgers PR-300S Owner's Manual page 131

.OMNION
Status Second Third
BnH 7DH OOH
n=MIDI channel number :OH - FH (ch.1 - ch.16)
':'OMNI ON is only recognized as "all notes off'. Mode doesn't change (OMNI OFF remains).
• MONO
Status Second Third
BnH 7EH mmH
n=MIDI channel number :OH - FH (ch.1 - ch.16)
mm=number of mono channels :OOH - 10H (0 - 16)
*MONO is recognized as "all sounds off". The specified channel turns to Mode4 (M=I), even if mm is note equal to I (mm is ignored).
• POLY
Status
BnH
Second
7FH
Third
OOH
n=MIDI channel number
:OH -FH (ch.1 - ch.16)
"'POLY is recognized as "all sounds off'. The specified channel turns to Mode3 .
• System Realtime Messages
.Active sensing
Status
FEH
~'Having
received and "active sensing" message. GS expects to receive additional active sensing messages at 300ms intervals. I f the interval is
greater than 420ms. GS executes "AU sounds off', "AU notes off" and "Reset all controllers", and returns to normal operation. (Monitoring of active
sensing messages will terminate).
• System Exclusive Messages
Status Data
FOH iiH, ddH ...... eeH
Status
F7H
FOH
ii=1D number
dd•. , ... ec=data
F7H
:System exclusive
:The ID number identifies the manufacturer of a MIDI device that triggers an exclusive messages. Values 7EH and 7FH are
reserved for use as universal messages which are used as an extension of the MIDI Standard.
41 H Roland's Manufacturer ID
7EH : Universal Non-Realtime Message
7FH : Universal Realtime Message
:OOH-7FH
(0 -
127)
:EOX (End of Exclusive/System common)
.System Exclusive Messages of Mode Change
Syslem Exclusive Messages of Mode Change are the messages used to initialize the internal parameters of the device
10
General MIDI mode or GS
default mode. "GS Reset" uses a form of Roland Exclusive Message. 'Turn General MIDI System On" and "Turn General MIDI System Off' use a
form of Universal Non-Real Time message.
123