Selecting Reverb And Chorus Type; Selecting Reverb; Selecting Chorus - Rodgers PR-300S Owner's Manual

Selecting Reverb and Chorus Type
• •
• •
r "
• •
• •
• •
•
r
• •
• •
• •
• •
, .
4
(
L
+
TRANSPOSE
WRITE
-
TUNE
t
•
L
ENTER
t
Play Screen
Settings executed
(permanent)
TRANSPOSE
Delay with a short delay time
Echo with the rising and falling sound
of a .et enoine
Chorus with feedback
Short delay with a high repeat frequency
Chorus adding a slight waver to sounds
STOP
Flanger
/
Play Screen
Settings executed
(temporary)
Feedback
(Feedback Chorus)
S. Delay
S.D.FB
(Short Delay FB)
Chorus 1, 2, 3, 4
-
~
Chorus
54
If you press [STOP] the PR-300S will return to the
Play Screen and all changes you've made will be
stored temporarily. The temporary settings will not
be saved when you save the song to a disk.
Returning to the beginning of a song by pressing
[RESET] or [BWD] will cause the original settings
to return.
Pressing [WRITE] or [ENTER] then [ENTER] will
cause changes to become permanent. These
changes will be retained when the song is saved to
disk.
Pressing [WRITE] or [ENTER] then [STOP] will
cause all settings to be temporary.
(4) After you've selected the type of Reverb and
Chorus you desire, you can execute these
settings in two different ways.
(3) Press the [>] button to move the cursor to the
"Chorus:" setting. Rotate the alpha-dial to
select the type of Chorus desired.
(2) Rotate the alpha-dial to select the type of Reverb
desired.
(1)
While holding down [SHIFT], press
[EFFECTS].
Reverb
The PR-300S has eight different Reverb and eight
different Chorus effects from which you can choose.
Selecting Chorus
Selecting Reverb
Room 1,2,3 Three Room Settings
Hall 1,2 Reverb giving a sense of depth, as
within a concert hall
Plate Plate echo (reverb using vibrations from
a metal plate)
Delay
Standard delay (echo effect)
Panning
Delay with the sound moving from side
(Panning Delay) to side