Rodgers PR-300S Owner's Manual page 38

•
..
o
0 0 0 0
-~._-
L
• r
r
•
f
•
(
•
•
r
• •
• •
• •
•
•
• •
• •
• •
• •
r
~
(-
•
(
•
(
(
(
Rotate the alpha-dial to
change the tempo, if
desired. Then, press
[BEAT] and rotate the
alpha-dial to change
the time signature, if
desired.
t
"-2" or "-1" in the display
denotes a countdown measure.
A number without a minus sign
denotes a regular measure.
Press [METRONOME] if you want to
record to the sound of the Metronome.
Press [PLAY] and press organ
combination piston after two countdown
measures.
•
•
METRONOME
-
BEAT
-
......
•
III
30
This step allows you to record your registrations
into the sequence by pressing a combination piston.
A variety of time signatures is available to you.
All of the track buttons will flash red. This means
the PR-300S is asking you to select a track to
record onto.
The measure number in the display will read" -2,
-I" to denote two count-down measures, in which
nothing can be recorded. During the count-down
measures, the REC light will flash red and the
PLAY button will be solid green.
The volume of the metronome can be changed by
turning the METRONOME VOLUME pot on the
back of the PR-300S.
You can record your song onto any track, however,
"Track R" should be used for rhythm (drum) parts.
The Track I button is red and Play flashes green,
signifying it is ready to record.
This tells the PR-300S that we want to record onto
track I.
(9) After the two count-in measures are over, press
the piston on the organ which contains your
starting organ registration and/or PR-300S
sound selections.
(8) Press [PLAY] to start the Record function.
(7) Press [REAT] to move the .. prompt and rotate
the alpha-dial to change the time signature.
(6) Rotate the alpha-dial if you want to change the
tempo.
(5) Press [METRONOME] if you want to play to
the sound of the Metronome.
(4) Press [TRACK 1].
(3) Press [REC] on the PR-300S.