Rodgers PR-300S Owner's Manual page 30

(
(
(
~
C
C
(
4-
r
• •
• •
• •
•
(
• •
• •
• •
•
c :
C
l
r
C
(
4
L
l.
L
II..Jr.
i
+..e
Rotate alpha-dial to select
"Harpsichord" .
Press [TEMPO] to move i:' ·
prompt to this location
TRANSPOSE
•
TEMPO
J= -
~
WRITE
-
TUNE
22
When notes are pressed on the Great manual of
your Rodgers organ, they will play the
"Harpsichord" voice of the PR-300S.
The PR-300S will ask you if you are sure you want
to change the sound assigned to Part I (or Part 2).
Any of the PR-300S's 354 sounds can be selected
by rotating the alpha-dial.
When the
ii"
prompt is at the beginning of the
second line, rotating the alpha-dial will select a
different instrument for the specified part.
When the
ii"
prompt is at the beginning of the first
line, rotating the alpha-dial will select a different
part.
*Writing this change actually stores the sound
selections for each MIDI channel into the
beginning of the selected song. Therefore, if you
want to save your sound selections, you must save
the current song to disk (see "Saving a Song to
Disk").
*Any of the 16 parts of the PR-300S which are set to
"INT" can have instruments assigned to them using
the Sound Function. Parts which are set to "EXT"
cannot use the Sound Function.
*Part 10 will use one of the GS sound generator's 10
drum kits. Instruments other than the drum kits
may not be assigned to Part 10.
(3) Press [TEMPO] to move .. prompt to the
beginning of the second line.
(4) Rotate the alpha-dial until "Harpsichord" is
selected.
(5) Press [WRITE] once.
(6) Press [ENTER] to confirm change.