Changing The Volume Using An Expression Pedal; Connecting An Expression Pedal; Activating The Expression Pedal; To Change The Volume Of Pr-300S Parts - Rodgers PR-300S Owner's Manual

Changing the Volume Using an Expression Pedal
Normally, the volume of Parts is controlled from
external MIDI devices, such as a Rodgers organ or a
Rodgers keyboard equipped with an expression pedal.
If the device you are using to control the PR-300S
doesn't allow you to change the volume of PR-300S
parts, you can attach a compatible expression pedal to
the PR-300S and change the volume of PR-300S parts
by moving the pedal.
Connecting an Expression Pedal
Plug a compalible expression pedal inlo Ihe jack
marked EXPRESSION on Ihe back panel of the
PR-300S.
Activating the Expression Pedal
(1)
While holding down the [SHIFT] button, press
the [EXPRESSION] button.
These bUllons are located under the lOp cover.
(2) Rotate the alpha-dial until the display changes
to "On".
The expression pedal will now be able
10
control
the volume of PR-300S parts.
(3) Press [ENTER] to return to the Play screen.
To Change the Volume of PR-300S Parts
By moving the pedal with your foot, you
can now control the volume of the Part
listed in the screen after pressing the
[SOUND] button. Only the Part selected
after pressing the [SOUND] will change
when the expression pedal is moved.
Any movements of the expression pedal
which are made during a recording will
also be recorded.
56
- - - EXT CONTROL - - -
START/ PUNCH
000'
TRANSPOSE
(
r
.-
L
L
,.
• •
• •
•
4 1
(
I
• •
• •
•
4 1
41
{
4
4
l
L
l
(
(
(