Setting Tempo Record; Sync Recording - Rodgers PR-300S Owner's Manual

0 0 0
•
..
4
C
l.
• •
(
(
• •
• •
~
• •
• •
• •
•
(
• •
• •
• •
•
C
(
4
)
3 )( 4
o
0
•
«
!
BEAT
RESET
IEIII
-
TEMPO REC
-
P UNCH IN/OUT
(5) On the external sequencer, start playback of the
song to be recorded.
If you don't match the Time Signature with that of
the song being recorded, the measure numbers on
the PR-300S will not match up.
(4) Press the track button you wish to record on.
(2) Press the [REC] button.
The PR-300S will start recording when the external
sequencer starts playback.
(1)
Press the [RESET] button, if necessary, to move
to the first measure of the recording.
To Sync Record:
(1)
Press [TEMPO REC].
(3) Press the [BEAT] button and rotate the alpha-
dial to match the Time Signature with that of
the song being recorded.
(6) Stop the external sequencer (if necessary) at the
end of the recording.
The red light above the [REC] button will blink.
Setting Tempo Record
If you want the PR-300S to record the
tempo changes of the external MIDI
device, then you need to turn the PR-
300S's Tempo Record function on.
If you want the PR-300S to ignore tempo
changes of the external MIDI device, turn
the PR-300S's Tempo Record function off.
To turn the PR-300S's Tempo Record
function on or off:
(2) Rotate the alpha-dial to select either "On" or
"Off", then press [ENTER].
Sync Recording
Once everything is connected and set
correctly, all that is left is to record the
information on the PR-300S.
The PR-300S will stop when the external sequencer
stops.
L
When you are finished, return Sync and Tempo Record to their normal settings.
78
(
r