Pasting The Scratchpad Information Into The Song - Rodgers PR-300S Owner's Manual

Part·--Iets you specify which Part(s) will be
affected by the Copy or Erase operation. A number
can he selected by rotating the alpha-dial (or all
Parts can be selected by specifying "ALL".
You cannot use the Part Screen when performing a
Cut operation.
(3) When the Song Section, Track and Part (for
Copy and Erase) have been set correctly, press
[ENTER].
The PR-300S's display may read "Please wait ..."
for a few seconds while the PR-300S carries out the
operation. The information specified will be placed
in the scratchpad, where it will stay until it is either
replaced by other song data or the PR-300S is
powered off.
The section of song data you specified will either
stay the same (Copy), be replaced with blank
measures (Erase) or be replaced with song data
which follows it (Cut), depending on the operation
you chose.
Pasting the Scratchpad Information into the Song
The information put in the scratchpad
during the Copy, Cut or Paste operation
descnbed above can be placed Into the
song, if desired.
You have a number of options when
pasting data from the scratchpad. To paste
data stored in the scratchpad:
(1)
Press the [PASTE] button.
The Paste Screen appears.
(2) Use the [<] button, [>] button and alpha-dial to
select desired Paste options:
PASTE
-
ERASE
-
~
-
~
Track Part
Merge or Insert---specifies whether the
information to be pasted will be combined with
existing song information at that location (Merge)
or whether existing song information at that
location will be moved to make room for the pasted
information (Insert). Use the alpha-dial to select
either "MER" (Merge) or "INS" (Insert).
Location---determines where the pasted
information will be located within the song. For
instance, if you select measure 7, the first measure
of pasted song information will be placed at
measure 7.
81
•
I
F' l :::!::::;"!"' ! ::::
ill'
I
~
...
~
::::: : 1 .
-------------
Location
Location Track Part