Rodgers PR-300S Owner's Manual page 54

o
0 0 0 0
-~._-
The PR-300S also allows you to shift information
from one MIDI channel to another using the Cut and
Paste functions. If you have a keyboard which doesn't
allow you to change the send channel, you can utilize
multiple MIDI channels using the procedure outlined
below.
For this example, we']] use MIDI channel I as our
only send channel. Refer to the previous section if
you have any questions about the steps outlined
below.
(I) Using the Sound Function, select the desired
instrument for Part 1.
If your keyboard uses a different send channel, use
the part for that channel.
(2) Record a part on Track 1 using the Sound
selected in step 1.
Any empty track could be used.
Now that the first part has been recorded, we will
shift it to another channel.
(3) Press [CUT].
This bUllon is located underneath the top cover.
(4)
Press Track
1.
(5)
Press [ENTER] to remove recorded information
from Track 1.
(6) Press [PASTE].
This bUllon is located underneath the top cover.
(7) Press Track 2.
This is the track where
the
shifted
MIDI
information will be placed. Any track could be
used.
46
Select an Instrument
for Part 1 using
Sound Function
Record a part using
MIDI channel 1.
CUT
-
Q UANTIZE
TRANSPOSE
PASTE
-
ERASE
o
0 0 0 0
--~--
•
~
• •
~
• •
• •
• •
• •
• •
• •
• •
• •
•
•
4
L
~
l