Formatting A Disk; Midi - Rodgers PR-300S Owner's Manual

Formatting a Disk
You must format a disk before it can be used on
the PR-300S. The PR-300S can format either HD
(High Density) or DD (Double Density).
Formatting disks erases all information stored on
them. Make sure there is no information on the disk
which you want to save before you format it. It is
impossible to retrieve any information lost by
formatting a disk.
To format a disk:
(I)
Remove any disks from the PR-300S's drive.
(2) Hold [SHIFT] and press [DISK].
These bunons are located underneath the top cover.
(3) Rotate the alpha-dial to select "Disk Format".
(4) Press [ENTER].
The PR-300S will ask you to insert a new disk (you
can also insert a previously used disk that you want
to erase and re-format).
(5) Insert the disk to be formatted.
The PR-300S will ask you if it is okay to erase any
disk data which may exist. If you decide that you
don't want to format the disk, press [STOP).
(6) Press [ENTER] to start formatting process.
The PR-300S will take a few minutes to format the
disk. When it is finished, the Play Screen will
return.
93
MIDI
--
2r
Dr;
•
I
i : > I
::'~:::
,-_li,"_L:_'
~ _!.
:_:::._1<_ _
1"'_(_:'
i _·-·_r,._!.~_~i
_' ! :.. _