Rodgers PR-300S Owner's Manual page 4

FCC Notice
Radio and Television Interference
The Rodgers PR-300S Digital Sequencer and Sound Module uses and generates small amounts of
radio-frequency (RF) energy. The instrument complies with the limits set for Class A and Class B
computing devices. FCC Rules, Subpart J, Part 15 define the limits for radio and television
interference in a residential installation.
Follow the installation and the use instructions in this manual, or the PR-300S could potentially cause
interference with some radio or television reception. In the unlikely event that this occurs, we
encourage the user to try the following corrective measures.
• Turn the PR-300S OFF to see if it is the actual source of the interference.
• Disconnect the keyboard instrument and the PR-300S's input/output cables one at a
time. If the interference stops, it is caused by the keyboard instrument or its I/O
cable.
• Try coiling and uncoiling the PR-300S's power cord in different ways.
• Connect the instrument's power adaptor to a power outlet on a different circuit.
• Move the PR-300S farther away from the radio or television receiver.
• Connect the radio or television receiver to a different power circuit.
• Reorient or move the receiver antenna farther away from the PR-300S. Consider
installing a rooftop antenna with coaxial cable lead-in between the antenna and
receiver.
• Consult the nearest Rodgers dealer for more information if the above corrective
measures don't remove the interference.
11
4
(
4
4
4
4
4
C
(
(
(
(
(
•
C
• •
r
• •
• •
• •
• •
• •
• •
• •
• •
f :
~
r
• •
•
(
• •