Making The Connections; Pr-300S With Pditm Organs; Pr-300S - Rodgers PR-300S Owner's Manual

L
(
Making the Connections
(
f
•
(
(
•
£
•
(
• •
• •
• •
• •
•
(
• •
• •
• •
• •
r
l
("
•
L
•
(
• •
Audio Cable Connections
Connect the Land R OUTPUT of the PR-300S to the
appropriate Land R INPUT on your Rodgers organ.
If you are using a Rodgers organ without Audio Inputs,
connect the output of the PR-300S to the input of a keyboard
amplifier or mixer.
6
_ _ "0 _ _
Rodgers PDITM organs
MIDI Cable Connections
_ _ _
. . . , . . . . . . , . _ ~ o ,
_
0000000
PR-300S
Connect the appropriate MIDI OUT of your Rodgers organ to
the MIDI IN of the PR-300S (make sure you use the "IN" jack
on the back of the PR-300S, not the "IN
(1
CH)" jack. Then
connect the MIDI OUT of the PR-300S to the appropriate
MIDI IN of your organ.
In this section, we'll show you how to connect the PR-300S to a Rodgers organ or keyboard. Be sure
to
use the diagram for your
particular situation; the connections for a Rodgers Parallel Digital Imaging™ organ are found on this page, the connections for other
Rodgers organs and keyboards are found on the facing page.
Refer to the specific connection instructions at the bottom of this page. Then please read the section at the bottom of the facing page
about the AC Adaptor Connection and ORGAN EXT/INT switch.