Layering Sounds Of The Rodgers Organ - Rodgers PR-300S Owner's Manual

44
organ part. The organ's registrations and expression
movements will also be recorded along with all of the
notes which are played.
For best results, don't use the MIDI couplers
during the recording of the organ part, as information
they send may interfere with information you've
previously recorded.
The PR-300S will record all activated stops and all
expression movements during the recording of the
organ part.
Layering Sounds of the Rodgers Organ
If you want to layer the organ sounds (i.e., merge
the organ part to another track and add another organ
part to the empty track), you will have to use the
registrations and expression movements recorded in
the first pass. Make sure you don't use another organ
registration or move the expression pedals after the
first organ track.
Also, the organ normally records the organ's
registration and expression status at the beginning of
the recording. Once this has been recorded on the
first track, it is not necessary to have it recorded again
on subsequent tracks.
If you want to layer organ sounds (i.e., record
more than one track of organ sounds), record the first
track with the MIDI Master Channels and PR-300S
master clock enabled. Then, for all subsequent
recordings, disable the PR-300S's master clock using
the procedure outlined above. This will insure that
only one set of registration and expression settings
will be recorded. Of course, during the subsequent
layers, you should not select a stop or move the
expression pedal, or this information will be recorded.
Remember to turn the PR-300S's master clock on
after you are finished recording the multi-track organ
part.
Layering Organ Sounds
First pass All Subsequent passes
Enable PR-300S master Disable PR-300S master clock
clock
Make Stop Changes Don't Make Stop Changes
Move Expression Pedals Don't Move Expression Pedals
•
«
(
(
~
«
C
C
(
•
(
• •
• •
• •
•
~
• •
• •
• •
• •
4
~
(
•
(
f
(
r
c