Rodgers PR-300S Owner's Manual page 125

OModulation
Status Second Third
BnH 01 H vvH
n=MIDI channel number
vv=Modulalion depth
:OH - FH (ch.1 - ch.16)
:OOH - 7FH (0 - 127)
"'Ignored when "Rx. Modulation = Off".
*
Effect to the parameter set on "MOD controller function".
The default setting is pitch modulation depth.
OPortamenlO time
Status Second Third
BnH OSH vvH
n=MIDI channel number
vv=Portamento time
:OH - FH (ch.I - ch.16)
:OOH - 7FH (0 - 127)
"'The Portamento time value changes the rate of pitch change when Portamento is ON or when using portamento control messages.
Value 0 is the fastest.
OData entry
Status Second Third
BnH 06H mmH
BnH 26H IIH
n=MIDI channel number :OH - FH (ch.1 - ch.16)
mm.II=Value of the parameter specified with RPN and/or NRPN
OVolume
Status Second Third
BnH 07H vvH
n=MIDI channel number
vv=Volume
OPanpot
Status Second Third
BnH OAH vvH
n=MIDI channel number
vv=Panpot
:OH - FH (ch.I - ch.16)
:OOH - 7FH (0 - 127)
:OH - FH (ch.l - ch.16)
:OOH - 40H - 7FH (Left - Center - Right)
'" 127 steps from Left to Center to Right.
':'Within the Drum Part, the panpot provides overall control of the stereophonic image.
"'Ignored when "Rx.Panpol = OFF".
OExpression
Status Second Third
BnH OBH vvH
n=MIDI channel number
vv=Expression
:OH - FH (ch.1 - ch.16)
:OOH - 7FH (0 - 127)
*Expression and Volume messages are cumulative. and the result of both will control the overall volume.
Use Expression messages for an expression pedal, or creating expressive effects, such as crescendo and decrescendo, while playing.
*Ignored when "RX.Expression = OFF".
117