Using Chain Play - Rodgers PR-300S Owner's Manual

Using Chain Play
L
(
C
£
4
t
(
(
(
(
r
• •
• •
• •
(
(
• •
• •
• •
•
(
(
C
•
SONG
~
I
-
CHAIN PLAY
-
P AUSE MARK
The PR-300S will return to the single-play mode.
(4) Press [STOP] at any time to stop Chain Play.
• If you press [RESET] during Chain Play,
playback will stop and the current song will reset to
the beginning.
(2) Press [SONG], then rotate the alpha dial to
select the first song of the chain.
• If you press [CHAIN PLAY] while recording or
after a change has been made (when the "." mark is
displayed), the PR-300S will ask you
if
you want to
delete the song. If you want to erase the song, press
[ENTER]. If you want to keep the song, press
[STOP] and save the song on disk.
Playback of the chain will begin with the selected
song and will continue until you press [STOP].
This button is located underneath the top cover.
(3) Press [CHAIN PLAY].
(1)
Insert the appropriate disk into the disk drive.
To start Chain Play:
The PR-300S is equipped with a Chain Play
function which repeatedly plays all the songs on a
disk. When Chain Play is enabled, the PR-300S will
play each song in order, starting with the song you
select.
Note that the PR-300S will not stop at any Pause
Marks when in the Chain Play mode.
62
L
(
~
(
t
(