Preparing The Pr-300S For Multi-Track Sequencing; Deciding On Channels And Instruments - Rodgers PR-300S Owner's Manual

This is called "Enabling/Disabling MIDI Master
Channels" in your organ's Owner's Manual.
On Rodgers organs, make sure you disable
transmission of MIDI information on the Great and
Pedal Master Channels.
If
the organ you are using has single expression,
you will need
10
also disable the transmission of
MIDI information on the Swell Master Channel.
Preparing the PR-300S for Multi-Track
Sequencing
Next, the PR-300S's master clock must be
disabled (the "Clock Out" function is used for single-
pass record).
To disable the PR-300S's master clock:
(1) Press [MIDI].
This bullon is located under the top cover.
(2) Rotate the alpha-dial until the screen at right
appears in the display.
This is the screen where the master clock is enabled
and disabled.
(3) Press [TEMPO] to move"'-" prompt to the end
of the second line.
(4) Rotate alpha-dial to turn "Clock Out: Off".
(5) Press [ENTER] to confirm change.
Deciding on Channels and Instruments
The next step in Multi-Track Sequencing is to
determine how many parts will be needed and what
MIDI channels each should use.
Remember that channels 1-9 can be used to
control any of the 354 instruments on the PR-300S;
channel 10 can be used to control any of the 10 drum
kits of the PR-300S.
MIDI
-
DISK
•
TEMPO
J=
-
TRANSPOSE
35
II"ID I
Ii;'
c::
:I. () c·
k
()i,At..