Figure 17: Terminal Status Page (Top Part) - Hughes HN9000 User Manual

Chapter 2
The operational parameters listed on the Terminal Status page are shown in a tabular format. The first (left) column
identifies the parameter categories:
• Overall Status – Shows the major features such as dial backup or acceleration (not all features may be part of your
service plan.
• Transport Interface Receive Statistics – Indicates messages received and decoded by the satellite modem from the
satellite.
• Transport Interface Transmit Statistics – Indicates messages being queued up by the satellite modem for transmission
to the satellite.
• LAN Interface Statistics – Shows traffic across the LAN interface to the satellite modem.
• IP Forwarding and Routing Statistics – These refer to system control messages.
• Local IP Interface Statistics – Sum of various counts of messages.
• Dial Backup Status – Count of dial backup traffic if the feature is enabled. (Some listed features may not be included
in your service plan.)
• TCP Acceleration Statistics – Counts of messages and connections used between the satellite modem and its destination
if the feature is enabled. (Some listed features may not be included in your service plan.)
• SSL Acceleration Statistics – Counts of SSL traffic if the feature is enabled. (Some listed features may not be included
in your service plan.)
• DNS Caching Statistics – Counts on local storage of data if the feature is enabled. (Some listed features may not be
included in your service plan.)
• Management Statistics – Various internal network management traffic counts.
• Turbo Page Statistics – Counts of various web page requests and objects if the feature is enabled. (Some listed features
may not be included in your service plan.)
18
HN9000 Satellite Modem User Guide –
1037577-0001 Rev. A

Figure 17: Terminal Status page (top part)

System Control Center